KLIK POLY-NUTS
STANDARD & METRIC SIZES
Available in Aluminum or Zinc Plated Steel
2
Part #
Thread
Aluminum
Steel
Grip Range
Drill Size
Qty
6-32
.020”-.080”
1/4”
50
8-32
.020”-.080”
1/4”
50
10-24
.020”-.130”
9/32”
50
10-32
.020”-.130”
9/32”
50
1/4”-20
.030”-.165”
3/8”
25
5/16”-18
.040”-.200”
1/2”
25
3/8”-16
.040”-.200”
1/2”
15
4mm-.7
.020”-.080”
1/4”
50
5mm-.8
.020”-.130”
9/32”
50
6mm-1.0
.030”-.165”
3/8”
25
8mm-1.25
.040”-.200”
1/2”
25
» Klik Poly-Nuts are designed to provide a very efficient and cost-effective method of placing permanent
threads in thin materials.
» Installed from one side, Klik Poly-Nuts are perfect for use in metal, fiberglass and rigid plastic previously too
thin for tapped threads.
» Klik Poly-Nuts provide a nearly flush appearance and once in place, the internal threads are ready for a
screw or bolt.
» After installation, Klik Poly-Nuts provide permanent, captive threads that do not allow loosening under
vibration and will not rotate when attached to the mating material.
KLIK THREAD-SERTS
Plating: Zinc
Thread
Part #
Hole Size
Drill Size
Qty
6-32
.221
# 2
25
8-32
.250
1/4”
25
10-24
.281
9/32”
25
10-32
.281
9/32”
25
1/4”-20
.391
25/64”
25
5/16”-18
.500
1/2”
10
3/8”-16
.562
9/16”
10
» Use Klik Thread-Serts in any thickness of metal or rigid material of at least 3/32” (.0937).
» Klik Thread-Serts’ two piece design consists of an upper sleeve and a base which has internal threads.
» During installation the base is drawn upwards inside the upper sleeve forcing a 360° contact between the
sleeve and application material.
» Because of its unique setting ability, Klik Thread-Serts can be used in almost any thickness of material.
2-11